How To Repair Leaking Galvanized Water Pipe At Threads

jeffdo4u Posts: i, Reputation: 1

New Member

Oct xix, 2022, 03:15 PM

How to repair rusted galvanized h2o pipe

I have a leaking waterline under footing and the pipe is very rusty and corroded. How can I repair this without earthworks up my entire g and replacing all the pipe?

speedball1 Posts: 29,301, Reputation: 1939

Eternal Plumber

Oct 19, 2022, 03:29 PM

Yep! In that location is a way. Yous can have the pipe relined, This is just one of many companies that do this. Expect to pay about as much as yous would if you dug it up and replaced it. Cheque information technology out at; Epoxy Pipe Lining
Good luck, Tom

Add your answer hither.

Check out some similar questions!

Slow draining sink - rusted galvanized plumbing [ 4 Answers ]

I had 2 slow draining bathroom sinks, one of which cleared up beautifully when I replaced the trap (clogged with rust and other gunk). I tried the same set up on the other, but it didn't help much, if any. And then I took the trap back off and ran a manus snake through the galvanized pipe that goes into...

Galvanized pipe to either Copper/CPVC piping [ 14 Answers ]

I had a leak in my cold h2o feed which happens to be galvanized pipage. It was betwixt two floors and I cutting out the affected department. I am going to replace the cutting out department with either copper or CPVC. But how does one connect unthreaded galvanized pipe to the after mentioned pipes? I don't know if...

How can I repair rusted/tarnished brass? [ 8 Answers ]

Hi. I bought a contumely suit valet that was used. It seems to exist tarnished and rusted/corroded, specially the tray that held coins. I tried some silvery polish, steel wool, common salt and lemon juice, but nada seems to become the rust or the tarnish off! Whatsoever advice would exist appreciated. Thanks!

Water piping repair [ ane Answers ]

I but purchased a home that was built in the lxx's. The house has been vacant for awhile and someone has cut/stolen the copper pipes that bring water into the firm through the hot water heater. How do set this? (DIY of course) Can I utilise PVC?

Breaking Loose Rusted Galvanized Pipes [ three Answers ]

I need to break a rusted galvanized pipe articulation that is used is used for yard watering system. Is in that location whatever compound that tin be applied to the metallic that will brand it easier? I haven't been able to become it to move with 14 inch pipe wrench. Next I'g going to effort to rig up a cheater with a length...

View more questions Search